Home Hardware › Brass › lucky line 1 1 4

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho more

B&P Lamp® 1-1/4 Inch Diameter 1/8 IP Stamped Steel Check Ring Antique Brass Finish

Stamped steel seating ring with curled edge antique brass finish slips 1/8IP 1 1/4 Inch diameter more

1/2 x 9/16 x 1-1/4 Brass S Pattern Flat Washers (12 pcs.)

Diameter: 9/16 Diameter 2: 1-1/4 Thickness: 3/32 Material: Brass Nominal Size: 1/2 Style: S Pattern Type: Flat Washer Box of 12. A flat washer is a thin usually round plate with a hole in the middle that is normally used to distribute the load of a... more

National Hardware N890-018 1-1/16 in. x 4-1/2 in. Rigid Eye Snap Brass Plated

Features: Designed to use with rope chain strap animal leashes and other home farm and recreational applications Spring snap is for quick attachment Fixed eye for applications that will not twist Coated with Weatherguard Protection to withstand harsh... more

Hillman Trim Nail 1-1/4 Brass Plated Brass Viewpack 1 Oz

Metal trim nail brass plated. Length 1-1/4 Steel Metal trim nail Brass-plated. more

1/4-20 x 1 1/2 Machine Screws Brass Flat Head Slotted Drive Full Thread Plain Finish (Quantity: 100 pcs)

Thread Diameter - Pitch: 1/4-20 Length: 1 1/2 Brass is Anti-Corrosive Water Resistant and Aesthetically Pleasing more

Brass Hex Bolts 1/2-13x2-1/2 1 Pack Fully Thread Grade 4.8 Machine Screws

Description: 1. Material: The hex bolt is made of brass compared with other metal elements the brass has good conductivity and thermal conductivity corrosion resistance and wear resistance. 2. Advantage: The thread teeth are deep neat and clear and the... more

Standoff Round - Male #6-32 x 1/4 (OD) x 1-1/8 (Body Length) Brass (QUANTITY: 500)

Compare to: RAF: 4044-632-B-5 and AMATOM®: 9801-B-0632-4 Round shaped mechanical device which has an opening with a partial internal thread at one end Has an externally threaded post at the opposite end. It is used to hold two components at a given... more

Upholstery Decorative Nails - CS No. 6920-BP 1/2 - Brass Plated - 1/4 D X 1/2 L (200 Count)

Diameter of Nail Head:1/4 inches | Length of Nail Shank (Post):1/2 inches. Steel Tacks for Furniture Upholstery Finish:Brass Plated Quantity Per Box:200 Nails Manufactured by C.S. Osborne & Co. (MPN# 13716) more

Satco 12-1/2in Light Duty Harp 1/8 IP Saddle 1/4-27 Thread Polished Brass

12-1/2in Polished Brass Finish Light Duty Harp with 1/8IP Saddle more

1/4 OD Round Standoffs (Male-Female) / 6-32 x 1 1/8 / Brass / Nickel - 500 Piece Carton

Fastener SuperStore Offers Bulk Round Standoffs (Male / Female) - 1/4 Outer Diameter / 6-32 x 1 1/8 / Brass / Nickel in 500 Pc. Cartons more

Round Spacer - Brass (Zinc-Plated) - 2 OD x 1 1/4 Long - For 1 Screw Size

Used to connect separate or position two unthreaded parts in assemblies. These are co mmonly used to isolate electrical components and give space for heat to dissipate. Brass is electrically conductive nonmagnetic and has a zinc-plated finish to... more

Satco 5-1/2in Light Duty Harp 1/8 IP Saddle 1/4-27 Thread Polished Brass

5-1�2in Polished Brass Finish Light Duty Harp with 1/8IP Saddle more

Hillman 16 Ga. X 1-1/4 in. L Brass Brad Nails 1 pk 2 oz

Wire brads are small gauge nails used for finer applications. They have small cupped heads and small diameters perfect for sinking beneath the wood surface for concealment. Commonly used in detail carpentry applications these nails are designed for... more

Brass Hex Bolts 1/2-13x1-1/2 1 Pack Fully Thread Grade 4.8 Machine Screws

Description: 1. Material: The hex bolt is made of brass compared with other metal elements the brass has good conductivity and thermal conductivity corrosion resistance and wear resistance. 2. Advantage: The thread teeth are deep neat and clear and the... more

Satco Finial 1-1/2in Height 1/4-27 Polished Brass

1-1/2in Polished Brass Finial 1/4-27 more

Satco 13-1/2in Light Duty Harp 1/8 IP Saddle 1/4-27 Thread Polished Brass

13-1/2in Polished Brass Finish Light Duty Harp with 1/8IP Saddle more

1/4 -20 x 1-1/2 Brass Slotted Flat Head Machine Screws (10 pcs.)

Diameter: 1/4 Length: 1-1/2 Material: Brass Head Style: Flat (Slotted) Thread Size: 20 (Coarse) Thread Length: Full Type: Machine Screw Box of 10. A machine screw also called a stove bolt is generally a smaller fastener threaded the entire length of... more

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho more

Round Spacer - Brass (Zinc-Plated) - 1/2 OD x 1 Long - For 1/4 Screw Size

Used to connect separate or position two unthreaded parts in assemblies. These are co mmonly used to isolate electrical components and give space for heat to dissipate. Brass is electrically conductive nonmagnetic and has a zinc-plated finish to... more

Round Spacer - Brass (Zinc-Plated) - 1/2 OD x 1/2 Long - For 1/4 Screw Size

Used to connect separate or position two unthreaded parts in assemblies. These are co mmonly used to isolate electrical components and give space for heat to dissipate. Brass is electrically conductive nonmagnetic and has a zinc-plated finish to... more

1/4 -20 x 1 1/2 Coarse Thread Machine Screw Phillips Pan Head Brass Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-112052 Fastener Type: Machine Screw Phillips Pan Head Size Description: 1/4 -20 x 1 1/2 Diameter/Nominal Size: 1/4 Length: 1 1/2 Thread Pitch: 20 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage:... more

1/2 x 9/16 x 1-1/4 Brass S Pattern Flat Washers FLWSRB-128 (8 pcs.)

Diameter: 9/16 Diameter 2: 1-1/4 Thickness: 3/32 Material: Brass Nominal Size: 1/2 Style: S Pattern Type: Flat Washer Box of 8. A flat washer is a thin usually round plate with a hole in the middle that is normally used to distribute the load of a... more

1/4 OD Hex Standoffs (Male-Female) / 6-32 x 1 1/8 / Brass / Nickel - 500 Piece Carton

Fastener SuperStore Offers Bulk Hex Standoffs (Male / Female) - 1/4 Outer Diameter / 6-32 x 1 1/8 / Brass / Nickel in 500 Pc. Cartons more

8-32 x 1 1/8 1/4 OD Hex Standoffs (Male-Female) | Brass | Nickel (Quantity: 500)

8-32 x 1 1/8 1/4 OD Hex Standoffs (Male-Female) | Brass | Nickel (Quantity: 500) more

Standoff Round - Male #8-32 x 1/4 (OD) x 1-1/8 (Body Length) Brass (QUANTITY: 500)

Compare to: RAF: 4044-832-B-5 and AMATOM®: 9801-B-0832-4 Round shaped mechanical device which has an opening with a partial internal thread at one end Has an externally threaded post at the opposite end. It is used to hold two components at a given... more

Round Spacer - Brass (Zinc-Plated) - 1 OD x 1/4 Long - For 1/2 Screw Size

Used to connect separate or position two unthreaded parts in assemblies. These are co mmonly used to isolate electrical components and give space for heat to dissipate. Brass is electrically conductive nonmagnetic and has a zinc-plated finish to... more

Upholstery Decorative Nails - CS No. 6920-BP 1/2 - Brass Plated - 1/4 D X 1/2 L (100 Count)

Diameter of Nail Head:1/4 inches | Length of Nail Shank (Post):1/2 inches. Steel Tacks for Furniture Upholstery Finish:Brass Plated Quantity Per Box:100 Nails Manufactured by C.S. Osborne & Co. (MPN# 13716) more

1/4-20 x 1 1/2 Machine Screws Brass Flat Head Phillips Drive Full Thread Plain Finish (Quantity: 100 pcs)

Thread Diameter - Pitch: 1/4-20 Length: 1 1/2 Brass is Anti-Corrosive Water Resistant and Aesthetically Pleasing more

6-32 x 1 1/8 1/4 OD Round Standoffs (Male-Female) | Brass | Nickel (Quantity: 500)

6-32 x 1 1/8 1/4 OD Round Standoffs (Male-Female) | Brass | Nickel (Quantity: 500) more

1/4 OD Hex Standoffs (Male-Female) / 8-32 x 1 1/8 / Brass / Nickel - 500 Piece Carton

Fastener SuperStore Offers Bulk Hex Standoffs (Male / Female) - 1/4 Outer Diameter / 8-32 x 1 1/8 / Brass / Nickel in 500 Pc. Cartons more

Upholstery Decorative Nails - CS No. 6920-BP 1/2 - Brass Plated - 1/4 D X 1/2 L (200 Count)

Diameter of Nail Head:1/4 inches | Length of Nail Shank (Post):1/2 inches. Steel Tacks for Furniture Upholstery Finish:Brass Plated Quantity Per Box:200 Nails Manufactured by C.S. Osborne & Co. (MPN# 13716) more

BULYAXIA 485.26D Brass Door Stop with Keeper #12 x 1-1/4 FH WS Fastener with Plastic Anchor 1-5/8 Base Width x 2-5/8 Base Length 3 Height Chrome Plated Finish

BULYAXIA Door Stops with Keeper are Back Plate Prevents Damage to Wall. These Wall Stops are Concealed Mounting and Made with Cast Brass Material FH WSPlastic Anchor Fastener 1-12 Base Width x 2-12 Base Length 2-18 Height more

Upholstery Decorative Nails - CS No. 6920-BP 1/2 - Brass Plated - 1/4 D X 1/2 L (500 Count)

Diameter of Nail Head:1/4 inches | Length of Nail Shank (Post):1/2 inches. Steel Tacks for Furniture Upholstery Finish:Brass Plated Quantity Per Box:500 Nails Manufactured by C.S. Osborne & Co. (MPN# 13716) more

Hex Standoff - Male-Female #6-32 x 1/4 (OD) x 1-1/8 (Length) Brass Nickel Plating (QUANTITY: 500)

Compare to: RAF: 9744-B-0632-4 and AMATOM®: 1455-M03-F07-632 An opening with a partial internal thread at one end an externally threaded post at the opposite end It is used to hold two components at a given distance from each other. Standoffs are... more

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho

25 Small Oil Rubbed Brass Fleur De Lis Upholstery Framing Tacks Decorative Nails 1 1/2 X 1 3/4 Long Concho more

Round Spacer - Brass (Zinc-Plated) - 1/2 OD x 2 1/2 Long - For 1/4 Screw Size

Used to connect separate or position two unthreaded parts in assemblies. These are co mmonly used to isolate electrical components and give space for heat to dissipate. Brass is electrically conductive nonmagnetic and has a zinc-plated finish to... more

Hex Standoff - Male-Female #8-32 x 1/4 (OD) x 1-1/8 (Length) Brass Nickel Plating (QUANTITY: 500)

Compare to: RAF: 9744-B-0832-4 and AMATOM®: 1455-M03-F07-832 An opening with a partial internal thread at one end an externally threaded post at the opposite end It is used to hold two components at a given distance from each other. Standoffs are... more