Power Tools › welding helmets

RG-45 - Oxy-Acetylene Carbon Steel Welding Rod (R45) - 36 x 1/16 (2 Lb)

RG45 is a copper coated low carbon steel rod which is widely used for oxyfuel welding on mild steel. It has good ductility and good machinability. Its typical minimum weld tensile strength is 45 ksi and it conforms to AWS A5.2 R45. RG45 can be used on... more

Weldcote Metals ER70S-6 1/16 X 36 TIG Welding Rod 1 lb.

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for... more

Lincoln Electric MIG Welding Wire L-56 .025 Spool ED015790

Lincoln s premium copper coated MIG wire Super Arc® L-56 is an excellent choice for welding on metals with a medium to high presence of mill scale. For best performance use on clean oil-free and rust-free base material. Best weld appearance and toe... more

Weldcote Metals 308L 3/32 X 36 Tig Welding Rod 10 Lbs.

Weldcote Metals 308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbide precipitation. Ideal for welding Types 304L 321 and 347 stainless steels. This is a... more

Weldcote Metals Aluminum 4043 1/8 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in spools or cut lengths for MIG or TIG processes. This alloy is recommended for welding 3003 3004 5052 6061 6063 and casting alloys 43 355 356... more

iMeshbean Mig Welding Gun Torch Stinger Replacement for Miller 169596 250 Amp 12 FT M25 Welder Parts USA

iMeshbean Mig Welding Gun Torch Stinger Replacement for Miller 169596 250 Amp 12 FT M25 Welder Parts USA more

Steinel 07361 Welding Iron for Heat Guns

Steinel accessories are precision formed from high-grade polished stainless steel for superior performance and reliability. The Welding Iron is for use with Steinel heat guns to fuse materials together. Dimension - 2.5 x 1.5 x 1 in. Item Weight - 0.1... more

Weldcote Metals R45 3/32 X 36 Gas Welding Rod 10 Lbs.

Weldcote Metals R45 is a copper coated gas welding rod that is used for welding ordinary low carbon steel up to 1/4 thick. It is recommended where ductility and machinability are most important. R45 produces high quality welds which are ductile and... more

Blue Demon 58FC-G X .045 X 25LB Spool flux core gas shielded hardfacing welding wire

58FC-G is a metal-cored economical hardfacing alloy designed to resist abrasion. This gas shielded wire can be welded out of position. more

Weldcote Metals 316L 3/32 X 36 Tig Welding Rod 10 Lbs.

Please note the shipping delivery estimate before placing your order!Weldcote Metals Part # 316L332X36TWeldcote Metals 316L has the same analysis as ER316 except that the carbon content is limited to a maximum of 0.03% in order to reduce the... more

Weldcote Metals Nickel 99 Cast Iron Welding Electrode Repair 1/8 1 lb.

NI 99 is designed for welding of gray iron castings to themselves as well as joining them to mild steels or stainless steels. It is also used extensively to repair castings. The welds are quite Machin able. A preheat and interpass temperature of not... more

Blue Demon 308LFC-O X .035 X 25# Spool stainless steel flux cored gasless welding wire

308LFC-O is the self shielding tubulare version of solid ER308L stainless steel wire. The benefit of using this wire is that it does not require a shielding gas. more

Blue Demon ER309L X .045 X 30LB Spool stainless steel welding wire

ER309/309L is very similar to type 309 except for the carbon content being lower than .03%. Welding positions full vertical overhead horizontal. more

Uniweld UNIWELD MD100TH Gas Welding Outfit HS-MDUF

Gas Welding Outfit Compatible Fuel Type Acetylene Torch Handle Model MD100TH Cutting Tip Manufacturer Part Number 3-101A-0 Cutting Attachment Manufacturer Part Number MD1350CA Head Angle 90 Degrees Welding and Brazing Tip Manufacturer Part Number... more

UNIWELD HS-MDUF Gas Welding Outfit, AMERIFLAME Series, Acetylene

Gas Welding Outfit, Compatible Fuel Type Acetylene, Torch Handle Model MD100TH, Cutting Tip Manufacturer Part Number 3-101A-0, Cutting Attachment Manufacturer Part Number MD1350CA, Head Angle 90 Degrees , Welding and Brazing Tip Manufacturer Part... more

ER5356 - TIG Aluminum Welding Rod - 36 x 3/32 (2 LB)

ER5356 - ROD - TIG (GTAW) - ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod aluminum with 5% magnesium alloy for use on many weldable cast and wrought aluminum alloys. High strength extremely resistant to corrosion and resistant... more

E316L-16 - Stainless Steel Welding Electrode - 14 x 1/8 (2 LB)

E316L-16 STAINLESS STEEL ELECTRODE AWS A5.4 Welding Positions: All except vertical down AC & DC+ (reverse polarity) INTRODUCTION: Rutile high-alloy stick electrode. Molybdenum grade for increased corrosion resistance. Can be welded in any position... more

Weldcote Metals Aluminum 5356 3/32 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 5356 (commonly referred to as AlMg5) is a 5% magnesium aluminum filler metal that is available for MIG or TIG welding processes. The weld deposit of Weldcote Metals 5356 offers much better corrosion resistance when exposed to salt... more

Weldcote Metals Aluminum 4043 1/16 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in spools or cut lengths for MIG or TIG processes. This alloy is recommended for welding 3003 3004 5052 6061 6063 and casting alloys 43 355 356... more

Forney 30905 E7018 Welding Rod

The Forney 309057018 Mild Steel Low Hydrogen Welding Rod produces quality results on low amperage DC welders and higher amperage AC welders. Suitable for all positions on hard enable steels without preheating. Good on cold rolled steels without... more

Bernard 360-L3A-15 Mig Welding Liners

MIG Welding Liners 0.035 in - 0.045 in x 15 ft For Legacy Q-Gun Bernard MIG Welding Liners WARNING: This product can expose you to LEAD a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more... more

Blue Demon 308LT1/4 X .045 X 33LB Spool stainless steel flux core gas shielded welding wire

308LT1-1 is a titania type all position flux-cored wire designed for MAG welding of low carbon 18%Cr-8%Ni stainless steels including AISI 304 304L 304LN ASTM A157 Gr. C9; A320 Gr. B8C or D. more

ER4043 - TIG Aluminum Welding Rod - 36 x 1/8 (5 LB)

ER4043 - TIG (GTAW) – ALUMINUM AWS A5.10 Welding Positions: All INTRODUCTION: TIG welding rod used on many weldable cast and wrought aluminum alloys 5% silicon. Untreated low strength values. Generally recommended for welding 5052 any 6XXX series... more

Blue Demon 316LT1/4 X .035 X 33LB Spool stainless steel flux core gas shielded welding wire

316LT1 is a titania type all position flux-cored wire designed for MAG welding of low carbon 18% Cr-12% Ni-2% Mo stainless steels. more

Blue Demon 55FC-O X .045 X 10LB Spool flux core gasless hardfacing welding wire

55FC-O is a self-shielded metal-core wire that deposits a premium martensitic alloy steel of H-12 tool steel composition. It has excellent resistance to adhesive wear. more

Firepower 1440-0222 Mild Steel Welding Mig Wire .035-inch 33-Pounds

ER70S-6 Mild Steel Welding Mig Wire .035 33 Lbs. more

ER70S-6 - MIG Mild & Low Alloy Steel Welding Wire - 33 Lb x 0.023

ER70S-6 - WIRE - MIG (GMAW) - MILD & LOW ALLOY STEEL AWS A5.18 Welding Positions: All INTRODUCTION: Mild steel solid MIG wire with manganese and silicon deoxidizers tolerate medium to heavy mill scale surfaces. Copper-plated and layer wound.... more

Weldcote Metals ER70S-2 3/32 X 36 TIG Welding Rod 1 lb.

Weldcote ER70S-2 is primarily for single-pass welding of killed semi-killed and rimmed steels but may also be used for some multi pass applications. Because of added deoxidants ER70S-2 can be used for welding steels that have a rusty or dirty surface... more

Weldcote Metals ER70S-2 1/8 X 36 TIG Welding Rod 1 lb.

Weldcote ER70S-2 is primarily for single-pass welding of killed semi-killed and rimmed steels but may also be used for some multi pass applications. Because of added deoxidants ER70S-2 can be used for welding steels that have a rusty or dirty surface... more

Grade T Twin-Line Welding Hose 3/8 in 100 ft BB Fittings Fuel Gases and Oxygen

Grade T Twin-Line Welding Hose 3/8 in 100 ft BB Fittings Fuel Gases and Oxygen Best Welds Grade T Twin-Line Welding Hoses WARNING: This product can expose you to Lead a chemical known to the State of California to cause cancer and birth defects or... more

CK Worldwide MT200-AC/DC TIG Welding System

The MT200-AC/DC is a 220V/115V square wave AC/DC TIG inverter welder incorporating full TIG functionality including A balance control gas pre flow and post flow variable pulse parameters high frequency (HF) start and remote current control. The HF... more

Jackson Safety Welding Electrode Holder JH-2 (14683) Aluminum Alloy 5/32 Inch Capacity Light Duty 24 / Case

Jackson Safety Welding Electrode Holder JH-2 (14683) Aluminum Alloy 5/32 Inch Capacity Light Duty 24 / Case more

ENiCl - 99% Nickel/Cast Iron Welding Electrode - 12 x 1/8 (1 LB)

ENI-CL 99% NICKEL ELECTRODE AWS A5.15 Welding Positions: All except vertical down AC & DC± (reverse or straight polarity) INTRODUCTION: Basic graphite-coated stick electrode. Used for welding of cast irons to other cast irons as well as for joining... more

Weldcote Metals Aluminum 5356 1/16 X 36 TIG Welding Rod 1 lb.

Weldcote Metals 5356 (commonly referred to as AlMg5) is a 5% magnesium aluminum filler metal that is available for MIG or TIG welding processes. The weld deposit of Weldcote Metals 5356 offers much better corrosion resistance when exposed to salt... more

Weldcote Metals ER70S-6 .045 X 36 Tig Welding Rod 10 Lbs.

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for... more

Blue Demon ER308L X .045 X 30 lb Spool stainless steel welding wire

ER308/308L is used for welding types 304 304L 308 and 308L stainless steels. It is very similar to type 308 but has a carbon content held to a max of .03%. more

Hobart Er70S-6 Solid Welding Wire 2Lb

Hobart 2 lb. ER70S-6 carbon steel solid welding wire. more

Tweco TWECO Copper Conical MIG Welding Nzl PK2 12201306

Heavy Duty Style Nozzle 1/2 in Bore 1/8 in to 5/32 in Tip Recess Self-Insulated Standard Slip-On for Tweco No 2 Gun Tweco Heavy Duty Style Nozzles WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Nozzle Style: Slip-On; 1/8 in to 5/32 in... more