Robotic & Radio Control Toys › Rpm › ho scale

RPM Axle Carriers Blue 1/16 EVR/SLH RPM73165 Electric Car/Truck Option Parts

This is the RPM Blue Axle Carriers for the TRA 1/16 scale E-Revo and 1/16 scale Slash. FEATURES: Blue plastic construction Stronger pivot ball mounting YOU WILL RECEIVE: One left and right axle carrier four molded caps eight 2x8mm flathead screws... more

RPM Rear Bumper Chrome SLH 4x4 RPM80123 Electric Car/Truck Option Parts

Our new rear bumper is modeled after full-sized short course and desert racing trucks for authentic scale realism utilizing the same great looking rear bumper as that found on the 2wd version of the RPM rear bumper and making the most of an all-new... more

RPM Long Rod Ends 12 Black TRA 1/10Rally RPM80512 Electric Car/Truck Option Parts

Overview RPM Rod Ends for Associated and Losi vehicles have been some our best selling RPM parts for over 2 decades! That same engineering combined with RPM bulletproof materials has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale... more

RPM RPM80692 Front Upper and Lower A-Arms for Traxxas .06Th E-Revo - Black

Upon the release of the Traxxas 1/16th Scale Mini E-Revo we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off... more

80783 Roof Mount Light Bar Nrrw Chrm

The goal of our Narrow Roof-Mounted Light Bar Set was to recreate a scale version of those light bars found in full-sized racing while striving for some reasonable amount of crash-survivability. Our Light Bar Set uses a unique hinged system that in the... more

RPM R/C Products 80472 Short Rod Ends 12 Black: TRA 1/10

The same engineering that made RPM Rod Ends for Associated and Losi vehicles some our best selling RPM parts for over 2 decades has gone into the creation of RPM Rod Ends for TRA 1/10th scale vehicles. These rod ends are tough! The area around the ball... more

RPM73615 RPM Hybrid Gearbox Housing & Rear Mount Kit (Blue) RPM73615

RPM R/C Products brand optional RPM Hybrid Gearbox Housing in Blue for the TRA 1/10 scale 2WD Slash Stampede E-Rustler and Bandit. FEATURES: 0.12 (3mm) thick 6061-T6 aluminum motor plate offers strength to lock in gear mesh and better heat dissipation... more

RPM Front Up/Low A-arms Blue 1/16 ERV RPM80695 Electric Car/Truck Option Parts

This is a pair of optional RPM Front Upper and Lower A-Arms for the TRA 1/16 scale Mini E-Revo. FEATURES: Nylon construction Blue in color YOU WILL RECEIVE: two Front Lower A-Arms two Front Upper A-Arms Two 3x12.5mm socket head screws Instruction sheet... more

RPM RC Products RPM70780 1-10 Scale Mock Radiator & Fans

Overview The Mock Radiator and Fans include everything needed to bolt it in place on your favorite scale ride. This simple set-up will add concours winning looks to everything from your prized shelf queen to your favorite basher. Our mock radiator and... more

RPM Front Bumper Mini E-Revo (1/16th Scale) Black

RPM Front Bumper Mini E-Revo (1/16th Scale) Black more

Rpm Rc Products RPM73842 4 x 4 Rear Bumper ECX Torment

The RPM Torment 4x4 Rear Bumper is a very unique design that dramatically improves strength durability and scale looks over any other bumper options available. This bumper is based off of a tubular scale support structure that mimics a full-scale 2-1/2... more

RPM R/C Products 82052 Black Revolver 2.2 Rear Wheels Rustler Stampede 2wd (2)

Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great looks... more

RPM R/C Products 82063 Rear Revolver 2.2 Chrome: TRA Elec Front/Nitro R

Overview Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great... more

RPM R/C Products 82053 Chrome Revolver 2.2 Rear Wheels (2) Rustler Stampede 2WD

Overview Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our Revolvers for 1/18th scale trucks. These larger versions have the same great... more

Rpm R/C Products Rpm70860 Slash 2Wd “No Clip� Body Mount Truck

We completely eliminate the through-the-body posts that destroy the scale looks of your Slash. We do this via an ingenious body mount system that uses a scale mock radiator out back and four unobtrusive screws out front that hide an under-body frame.... more

RPM R/C Products 70292 Through-The-Body Mock Side Exhaust Tips Black

Details are what brought RPM to build a set of custom mock through-the-body side exhaust tips that add that extra level of scale realism to your favorite 1/10th scale vehicle. RPM exhaust tips look fantastic on everything from short course trucks to... more

RPM Rear Bumper for Traxxas Slash 4x4 - Black

Upgrade your Traxxas Slash 4x4 with the RPM rear bumper modeled after full-sized short course and desert racing trucks for authentic scale realism. The all-new bumper mount design specifically for the 4x4 has the perfect blend of rigidity and... more

Rpm Front Shock Tower 2Wd Electric Slash Stampede Rustler Bandit Black RPM80852

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this... more

RPM RC Products RPM82232 Revolver Black Wide Wheelbase Wheels - 2.2 in. - Pack of 2

Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! These rock crawler versions of our extremely popular 1/18th scale wheels have the same great looks and rugged durability of their little brothers but are... more

Rpm Front Shock Tower For The Nitro Slash Nitro Rustler And Nitro Sport Black RPM80882

RPM Shock Towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this... more

RPM R-C Products RPM81442 Rear Skid Plate for ARRMA & Durango Vehicles

Overview: One of the highest dollar replacement items on any vehicle is the chassis especially when that chassis is a 3 – 4mm thick aluminum plate. On ARRMA and Durango 1:8 and 1:10 scale vehicles there’s absolutely no protection for the underside... more

RPM Extended Right Rear A-Arms Black Summit & Revo RPM70482 Electric Car/Truck Option Parts

This a pair of optional RPM Extended Right Rear A-Arms in Black for the 1/10 scale TRA Summit Revo and E-Revo. FEATURES: Composite plastic construction eliminates nearly all A-Arm slop allowing camber caster and toe angle settings to be more solidly... more

RPM Extended Left Rear A-Arms Black Summit & Revo RPM70432 Electric Car/Truck Option Parts

This a pair of optional RPM Extended Left Rear A-Arms in Black for the 1/10 scale TRA Summit Revo and E-Revo. FEATURES: Composite plastic construction eliminates nearly all A-Arm slop allowing camber caster and toe angle settings to be more solidly... more

Rpm Front Bulkhead Green Tra 2 Wheel Drive Vehicles 73754 Electric Car/Truck Option Parts RPM73754

Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design strength and durability. Our engineers reviewed the stock front bulkhead and found something... more

RPM R/C Products 73755 Front Bulkhead Blue 1/10 TRA 2WD

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale TRA 2wd vehicles is the ultimate in design strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The... more

RPM Front Bulkhead Black TRA 2 Wheel Drive RPM73752 Electric Car/Truck Option Parts

One of the most highly sought-after RPM parts is finally here! The RPM front bulkhead for 1: 10 scale Traxxas 2WD vehicles is the ultimate in design strength and durability. Our engineers reviewed the stock front bulkhead and found something curious.... more

RPM Front Upper/Lower A-Arms Red 1/16 ERV RPM80699 Electric Car/Truck Option Parts

Upon the release of the Traxxas 1/16th Scale Mini E-Revo we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off... more

RPM Long Rod Ends 12 Blue TRA 1/10Rally RPM80515 Electric Car/Truck Option Parts

Overview RPM Rod Ends for Associated and Losi vehicles have been some our best selling RPM parts for over 2 decades! That same engineering combined with RPM bulletproof materials has gone into the creation of RPM Rod Ends for Traxxas 1/10th scale... more

RPM Front Upper & Lower A-Arms ARRMA RPM81392 Electric Car/Truck Option Parts

RPM is synonymous with strength and durability plus we�re known for taking the extra steps to design unique parts worthy of your favorite ride. That�s why we�re releasing these front upper and lower A-arms for the ARRMA 1:10 scale line of... more

RPM R/C Products 73412 Mock Intake and Blower Set Black

This is the Mock (non-functional) Intake and Blower Set from RPM. FEATURES: Fits most 1/8 and 1/10 scale RC vehicle bodies Plastic construction black in color Paintable for added realism Three-piece with base and drive belt detail YOU WILL RECEIVE:... more

RPM R/C Products 70152 Mud Flap & Number Plate Kit:SC10 2WD R Bumper Only

The RPM Mud Flaps and Number Plate kit is designed to add that element of scale realism we love yet still allow the versatility to remove the mud flaps when they re not needed. Each kit complements our #70122 or #70125 SC10 2wd Rear Bumpers perfectly.... more

RPM R/C Products 73164 Axle Carriers Green: 1/16 TRA

Overview Traxxas released the 1/16th scale E-Revo in a Grave Digger version that just begs for more RPM green. RPM A-arms and axle carriers do the trick perfectly! Each RPM part is color matched to Traxxas molded green parts for a seamless blend of... more

RPM FR Upper & Lower A-Arms Green1/16 Grave Digger RPM80694 Electric Car/Truck Option Parts

Overview Traxxas released the 1/16th scale E-Revo in a Grave Digger version that just begs for more RPM green. RPM A-arms and axle carriers do the trick perfectly! Each RPM part is color matched to Traxxas molded green parts for a seamless blend of... more

RPM Rear Upper/Lower A-Arms Red 1/16 ERV RPM80609 Electric Car/Truck Option Parts

These are the optional RPM Rear Upper and Lower A-Arms for use on the TRA 1/16 Scale Mini E-Revo. FEATURES: Nylon construction Red in color YOU WILL RECEIVE: Left and right rear upper a-arms Left and right rear lower a-arms Two 2.3x13mm button head... more

RPM RPM80602 Rear Upper and Lower A-Arms for Traxxas .06Th E-Revo - Black

This is a pair of optional RPM Rear Upper and Lower A-Arms for the TRA 1/16 scale Mini E-Revo. FEATURES: Nylon construction Black in color YOU WILL RECEIVE: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet... more

RPM R/C Products 80605 Re Upper/Lower A-Arms Blue E-Revo

This is a pair of optional RPM Rear Upper and Lower A-Arms for the TRA 1/16 scale Mini E-Revo. FEATURES: Nylon construction Blue in color YOU WILL RECEIVE: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet... more

RPM R/C Products 82322 Revolver Wheels Black 2WD Slash Front Rim

RPM R/C Products brand pair of Revolver 2.2 - 3.0 Front Wheels for the 1/10 scale 2WD TRA Slash. FEATURES: Heavy duty spline drive eliminates wear and spinning associated with hex drive wheels Molded plastic construction black in color YOU WILL... more

RPM Front Bumpers Black 1/16 ERV RPM73982 Electric Car/Truck Option Parts

At just over 2 wide stock 1/16th scale Traxxas Mini E-Revo bumpers just aren t large enough to provide any protection to the front or rear end of these cool little trucks. RPM has that problem solved with our new bumpers that measure in at a full 4... more